CHHSV - 873 5599 KODAK FLEXICOLOR STABILIZER III & REPLENISHER/C-41

  • MSDS: CHHSV
  • Manufacturer: EASTMAN KODAK COMPANY
  • Product Name: 873 5599 KODAK FLEXICOLOR STABILIZER III & REPLENISHER/C-41
  • National Stock Number: 6750-01-274-2547
Product Identification

Product ID:873 5599 KODAK FLEXICOLOR STABILIZER III & REPLENISHER/C-41
MSDS Date:11/07/1997
FSC:6750
NIIN:01-274-2547
Kit Part:Y
MSDS Number: CHHSV

Responsible Party
EASTMAN KODAK COMPANY
343 STATE STREET
ROCHESTER, NY 14650
US

Emergency Phone: 716-722-5151

Info Phone: 800- 242-2424

Cage: 19139

Contractor
EASTMAN KODAK CO US CUSTOMER SERVICE/GOVERNMENT SALES
ROCHESTER, NY 14650-3129 US

Telephone: 800-828-6203

Cage: 5K871

Ingredients

WATER

CAS: 7732-18-5

RTECS: ZC0110000

Fraction By Weight: 95-100%


FORMALDEHYDE (SARA 302/313) (CERCLA)

CAS: 50-00-0

RTECS: LP8925000

Fraction By Weight: <0.1%

OSHA PEL SEE 1910.1048

ACGIH TLV: C 0.3 PPM, A2; 9596

EPA Report Quantity: 100 LBS

DOT Report Quantity: 100 LBS


METHYL ALCOHOL (METHANOL) (SARA 313) (CERCLA)

CAS: 67-56-1

RTECS: PC1400000

Fraction By Weight: <0.1%

OSHA PEL S, 200 PPM

ACGIH TLV: S,200PPM/250STEL; 96

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS


OCTYLPHENOXYPOLYETHOXYETHANOL

CAS: 9036-19-5

Fraction By Weight: <0.1%


SODIUM ALKYL PHENOXY ETHER SULFATE

CAS: 9014-90-8

Fraction By Weight: <0.1%

Hazards

Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:YES
Health Hazards Acute and Chronic:INHALATION-LOW HAZARD FOR RECOMMENDED
HANDLING. EYES-NO SPECIFIC HAZARD KNOWN. MAY CAUSE TRANSIENT
IRRITATION. SKIN-LOW HAZARD FOR RECOMMENDED HANDLING.
INGESTION-EXPECTED TO BE A LOW INGESTION HAZARD .
Explanation of Carcinogenicity:CONTAINS F [50-00-0] WHICH IS
LISTED BY NTP AND IARC AND REGULATED BY OSHA AS A CARCINOGEN.
Effects of Overexposure:NONE SPECIFIED BY MANUFACTURER.
Medical Cond Aggravated by Exposure:EXPOSURE TO FORMALDEHYDE MAY CAUSE
RESPIRATORY SENSITIZATION IN SOME INDIVIDUALS OR AGGRAVATE
PRE-EXISTING ASTHMATIC CONDITIONS.

First Aid

First Aid:INHALATION-IF SYMPTOMATIC, MOVE TO FRESH AIR. GET MEDICAL
ATTENTION. EYES-ANY MATERIAL THAT CONTACTS THE EYE SHOULD BE WASHED
OUT WITH WATER. GET MEDICAL ATTENTION. SKIN-WASH WITH SOAP AND
WATER. GET MEDICAL ATTENTION IF SYMPTOMS OCCUR. INGESTION-DRINBK
1-2 GLASSES OF WATER. SEEK MEDICAL ATTENTION. NEVER GIVE ANYTHING
BY MOUTH TO AN UNCONSCIOUS PERSON.

Fire Fighting

Flash Point:NONE
Extinguishing Media:USE APPROPIATE AGENT FOR ADJACENT FIRE.
Fire Fighting Procedures:WEAR SELF-CONTAINED BREATHING APPARATUS AND
PROTECTIVE CLOTHING.
Unusual Fire/Explosion Hazard:NONE.

Accidental Release

Spill Release Procedures:FLUSH TO SEWER WITH LARGE AMOUNTS OF WATER.
OTHERWISE, ABSORB SPILL WITH VERMICULITE OR OTHER INERT MATERIAL,
THEN PLACE IN A CONTAINER FOR CHEMICAL WASTE. CLEAN SURFACE
THOROUGHLY TO REMOVE RESIDUAL CONTAMINATION.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:KEEP CONTAINER CLOSED.
Other Precautions:AVOID BREATHING VAPOR. AVOID CONTACT WITH EYES, SKIN
AND CLOTHING. USE WITH ADEQUATE VENTILATION. WASH THOROUGHLY AFTER
HANDLING.

Exposure Controls

Respiratory Protection:NONE SHOULD BE NEEDED.
Ventilation:GOOD GENERAL VENTILATION (TYPICALLY 10 AIR CHANGES/HR)
SHOULD BE USED. VENTILATION RATES SHOULD BE MATCHED TO CONDITIONS
Protective Gloves:IMPERVIOUS GLOVES SHOULD BE WORN.
Eye Protection:SAFETY GLASSES WITH SIDE SHIELDS.
Other Protective Equipment:CHEMICAL PROTECTIVE CLOTHING MADE OF
MATERIAL IMPERVIOUS TO FORMALDEHYDE AND THE USE OF OTHER PERSONAL
PROTECTIVE EQUIP.
Work Hygienic Practices:WASH THOROUGHLY AFTER HANDLING.
Supplemental Safety and Health
WARNING! CONTAINS FORMALDEHYDE. POSSIBLE CANCER HAZARD.

Chemical Properties

HCC:B3
Boiling Pt:B.P. Text:>212F,>100C
Vapor Pres:18 MMHG
Vapor Density:0.6
Spec Gravity:1.001
pH:9.0
Solubility in Water:COMPLETE
Appearance and Odor:LIQUID, COLORLESS, SLIGHT FORMALDEHYDE ODOR.
Percent Volatiles by Volume:95-100

Stability

Stability Indicator/Materials to Avoid:YES
NONE WITH COMMON MATERIALS AND CONTAMINANTS WITH WHICH THE MATERIAL MAY
REASONABLY COME INTO CONTACT.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:FORMALDEHYDE.

Disposal

Waste Disposal Methods:DISCHARGE, TREATMENT, OR DISPOSAL MAY BE SUBJECT
TO NATIONAL, STATE OR LOCAL LAWS. FLUSH TO SEWER WITH LARGE AMOUNTS
OF WATER. SINCE EMPTIED CONTAINERS RETAIN PRODUCT RESIDUE, FOLLOW
LABEL WARNINGS EV EN AFTER CONTAINER IS EMPTIED.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.